1、該產品由全棉帆布（CC）或維棉交織浸膠帆布（VC）經壓延、成型、硫化等工序精制而成。
1. The product is refined by all cotton canvas (CC) or Uygur cotton interwoven dipped canvas (VC) through calendering, molding, vulcanization and other processes.
2、該產品適應不同使用條件的要求，可制成包邊式、開邊式、中梯型、邊梯型等不同結構
2. The product can meet the requirements of different service conditions, and can be made into different structures such as edge wrapping type, open edge type, medium ladder type and side ladder type
規格
Specifications
（1）帶芯材質：滌棉交織布TC-70型、全棉帆布CC-56型
(1) Core material: polyester cotton interwoven fabric tc-70, cotton canvas cc-56
（2）帶寬：300mm-3000mm
(2) Bandwidth: 300 mm-3000 mm
（3）布層：1-12層
(3) Cloth layer: 1-12 layers
（4）覆蓋膠厚度：工作面：1.5-10mm 非工作面：0mm-6mm。
(4) Covering glue thickness: working face: 1.5-10 mm, non working face: 0 mm-6 mm.
這種輸送帶用纖維織物作帶芯，用一般橡膠作覆蓋材料，表面光滑平整(圖1。帶芯是由棉、尼龍、聚酯或維尼綸等纖維編織成的分層或整體織物。棉纖維是應用較早的帶芯材料，易與橡膠粘合，濕態時強度略有提高，但破斷強度低〔大多在56牛/(毫米·層)左右〕,防腐防霉性差,使用日漸減少。20世紀50年代末開始用尼龍纖維織物作帶芯材料，并已成為用量較大的一種。尼龍纖維強度高達 700牛/（毫米·層），耐水，抗腐蝕，耐彎曲疲勞；但彈性伸長較大。聚酯纖維性能與尼龍纖維相近，而使用時彈性伸長僅為尼龍纖維的一半，是一種有發展前途的材料。維尼綸纖維強度達200牛/（毫米·層）,彈性伸長比尼龍纖維小，易與橡膠粘合，耐熱性能好，但濕態時強度要降低10～25%，僅在中國、日本等少數國家應用。在編織帶芯時可以只用一種纖維，也可用兩種纖維混紡或交織。
This kind of conveyor belt uses fiber fabric as belt core and rubber as covering material. Its surface is smooth and smooth (Fig. 1). The core is a layered or integral fabric woven by cotton, nylon, polyester or vinylon. Cotton fiber is a kind of core material used earlier. It is easy to bond with rubber. Its strength is slightly improved in wet state, but its breaking strength is low [mostly about 56 n / (mm · layer)]. It has poor anti-corrosion and mildew resistance and is used less and less. Nylon fabric has been used as core material since the end of 1950s, and it has become a kind of large amount. The strength of nylon fiber is as high as 700 n / (mm · layer), water resistance, corrosion resistance, bending fatigue resistance, but the elastic elongation is large. The properties of polyester fiber are similar to that of nylon fiber, but the elastic elongation is only half of that of nylon fiber, so it is a promising material. Vinylon fiber has a strength of 200N / (mm · layer), smaller elastic elongation than nylon fiber, easy to bond with rubber and good heat resistance. However, the strength of vinylon fiber is reduced by 10-25% in wet state, which is only used in a few countries such as China and Japan. Only one kind of fiber can be used in braiding core, or two kinds of fiber can be blended or interwoven.
3、普通輸送帶廣泛用于建材、化工、煤炭、電力、冶金等部門，適用于常溫下輸送非腐蝕性的無尖刺的塊狀、粒狀、粉末的多種物料，如煤炭、焦炭、砂石、水泥等散物（料）或成件物品，輸送堆積密度為6.5~2.5t/m3的各種塊狀、粒狀、粉狀等松散狀物料，也可用于成體物品輸送。
3. Ordinary conveyor belt is widely used in building materials, chemical industry, coal, electric power, metallurgy and other departments. It is suitable for conveying non corrosive bulk, granular and powder materials, such as coal, coke, sand and stone, cement and other bulk materials (materials) or finished products. It can also be used to transport various bulk, granular, powder and other loose materials with stacking density of 6.5 ~ 2.5t/m3 Transportation of adult goods.
Thank you for your reading. The article source: large angle conveyor belt. For more information and questions, please click: http://www.jsamsung.com.cn We will continue to work hard to provide services for you, thank you for your support!
聯系微信