大家都知道，流水線離不開輸送帶的傳送，能夠的完成生產，節省不少人力成本。但是如果使用的時候不注意也會出現橫斷的現象，這是哪些因素導致的呢？

　　As we all know, the assembly line is inseparable from the transmission of the conveyor belt, which can efficiently complete production and save a lot of labor costs. But if you do not pay attention to the use of transverse phenomenon, which factors lead to it?

　　遇到連續橫向現象，先停機檢查，經過仔細檢查，可以很明顯地發現這種現象的原因。輸送機可能有個別突出的滾筒槽角，導致輸送帶線斷裂，從而造成橫斷的結果。主動電動滾筒、張力電動滾筒和從動電動滾筒上面覆蓋了一些不正常的粘結物，使輸送帶充滿了各種大小的疙瘩，很容易使輸送帶出現全面積橫斷，避免這種現象的發生經常是定期清洗輸送帶的異物。

　　In case of continuous transverse phenomenon, stop the machine for inspection first. After careful examination, it is obvious that the cause of this phenomenon can be found. Conveyor may have individual prominent drum groove Angle, resulting in conveyor belt line fracture, resulting in transverse results. The active electric roller, tension electric roller and driven electric roller are covered with some abnormal adhesives, which make the conveyor belt full of bumps of various sizes. It is easy to make the conveyor belt cross section in the whole area. To avoid this phenomenon, foreign bodies in the conveyor belt are often cleaned regularly.

　　山東流水線輸送帶長期使用后會出現各種問題。為了避免出現問題，應提前進行預防。那么，如何防止輸送帶損壞呢?

　　The conveyor belt will have various problems after long-term use. In order to avoid problems, prevention should be carried out in advance. So, how to prevent the conveyor belt damage?

　　選擇資質完善、體系完善、信譽良好的輸送帶廠家供貨，消除流水線輸送帶本身質量帶來的潛在風險。膠帶受料及轉載點漏斗的設計應合理。既避免了形成較大的落差，又改變了貨物的流向，使物品流向和皮帶機的運輸一致。

　　Choose the conveyor belt manufacturers with perfect qualification, perfect system and good reputation to supply, eliminate the potential risks brought by the quality of assembly line conveyor belt itself. The design of material receiving and transfer point funnel should be reasonable. Not only to avoid the formation of a large drop, but also changed the flow of goods, so that the flow of goods and belt conveyor transport consistent.

　　禁止用輸送帶運輸大型物品和鐵質物品。對于粒徑符合要求的材料，還應保證溫度，以免造成皮帶表面覆蓋膠的損壞、剝離和脫落。從運輸系統源頭控制鐵器及堅硬長條片矸的進入，并沿運輸系統設置必要的破碎機和除鐵機。

　　It is forbidden to transport large items and iron items by conveyor belt. For the particle size meets the requirements of the material, but also to ensure the temperature, so as not to cause damage to the belt surface covering glue, peel and fall off. Control the entry of iron and hard strip gangue from the source of the transportation system, and install the necessary crusher and iron removal machine along the transportation system.

　　山東流水線輸送帶的存放應避免日曬雨淋。對于長期存放的輸送帶，須進行縱向拉伸強度試驗。對于輸送帶導槽、清掃器等附件，應認真進行日常維護，間隙增大或損壞應及時修理或更換。

　　The storage of conveyor belt should avoid sun and rain. For long - term storage conveyor belts, longitudinal tensile strength test should be carried out. For the conveyor belt guide groove, sweeper and other accessories, daily maintenance should be carried out carefully, and the gap increase or damage should be repaired or replaced in time.

　　另外，滾筒應定期檢查，盡早發現運行中的裂紋、局部過度磨損等隱患。以上便是問題的講解內容了，如果您還有其他問題，那就來此www.jsamsung.com.cn進行咨詢了解吧。

　　Additional, drum should check regularly, discover as soon as possible in running crack, local excessive wear and tear wait for hidden trouble. The above is the explanation of the problem content, if you have other questions, then go to www.jsamsung.com.cn for consultation.