雖然輸送帶在使用過程中非常容易操作，但是在安裝過程中還是有很多地方需要多加注意，當然定期的保養事項也不能拉下。下面來講講相關的內容吧。

Although the conveyor belt is very easy to operate in the process of use, there are still many places that need to be paid more attention in the installation process. Of course, regular maintenance items cannot be pulled down. Let's talk about the relevant content.

在安裝輸送帶之前，一定要檢查一些貨架的堅固程度，以及貨架的支架是否變形。此外，確保機架的對角線相等。在安裝過程中，由于一些金屬摩擦，會產生一些金屬屑和灰塵。在安裝過程中，應經常檢查托輥等重要部位是否干凈。托輥是輸送帶運行時的重要部件，所以在安裝好輸送帶后，需要檢查托輥的轉動是否正常、靈活。

Before installing the conveyor belt, be sure to check the firmness of some shelves and whether the supports of shelves are deformed. Also, make sure that the diagonals of the racks are equal. During installation, some metal scraps and dust will be generated due to some metal friction. During the installation process, it is necessary to often check whether the important parts such as idler are clean. The idler is an important part of the conveyor belt during operation, so after installing the conveyor belt, it is necessary to check whether the rotation of the idler is normal and flexible.

輸送帶的傳動滾筒直徑與輸送帶布層的關系、傳動滾筒、改向滾筒的配套以及對托輥槽角的要求應根據運輸機的設計規定，合理選取。給料方向應順輸送帶的運行方向，為減小物料下落時對輸送帶的沖擊應采溜槽，減小物料落差距離。

The relationship between the diameter of the transmission drum of the conveyor belt and the cloth layer of the conveyor belt, the matching of the transmission drum and the redirection drum, and the requirements for the groove angle of the idler shall be reasonably selected according to the design regulations of the conveyor. The feeding direction shall be along the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when materials fall, chute shall be adopted to reduce the drop distance of materials.

輸送帶受料段，應縮短托輥間距和采用緩沖托輥為漏料，耐熱輸送帶順應采用柔軟適度的擋料板，以免檔料板過硬，刮破輸送帶的帶面。防止輸送帶負荷啟動。輸送帶發生跑偏，應及時采取措施糾正。不同類型、規格層數的輸送帶不宜接在一起使用，其接頭采用膠接法。輸送帶的類型、結構、規格、層數應根據使用條件合理選用。

In the material receiving section of the conveyor belt, the distance between idlers shall be shortened and the buffer idlers shall be used for material leakage. The heat-resistant conveyor belt shall adopt a soft and appropriate baffle plate to avoid the baffle plate being too hard and scratching the belt surface of the conveyor belt. Prevent belt load starting. If the conveyor belt deviates, take measures to correct it in time. Conveyor belts of different types, specifications and layers should not be used together, and their joints should be bonded. The type, structure, specification and number of layers of conveyor belt shall be reasonably selected according to the service conditions.

即使大家在安裝輸送帶的時候注意了以上問題，也一定不要忘記經常對輸送帶進行維護和檢查，以免安裝不慎留下隱患。

Even if you pay attention to the above problems when installing the conveyor belt, you must not forget to often maintain and inspect the conveyor belt, so as to avoid hidden dangers caused by careless installation.

在運輸和儲存過程中，輸送帶應保持清潔，避免陽光直射或雨雪淋濕，防止與酸、堿、油、有機溶劑等物質接觸，與輸送帶保持1米距離加熱裝置。儲存期間，庫內溫度應保持在-18-40度之間，相對濕度應保持在50-80%之間。儲存期間，產品必須成卷放置，不得折疊。貯存期間應每季度翻動一次。

During transportation and storage, the conveyor belt shall be kept clean, avoid direct sunlight or rain and snow, prevent contact with acid, alkali, oil, organic solvent and other substances, and keep 1m away from the conveyor belt from the heating device. During storage, the temperature in the warehouse shall be kept between - 18-40 degrees and the relative humidity shall be kept between 50-80%. During storage, the product must be placed in rolls and shall not be folded. It shall be turned once a quarter during storage.

不同型號、規格的輸送帶不宜一起使用，接頭處應粘膠。輸送帶的類型、結構和層數應根據使用條件合理選擇。輸送帶的運行速度不應大于2.5m/s。對于結塊大、磨損大的物料，應采用定力式卸料裝置，盡量采用低速。

Conveyor belts of different models and specifications should not be used together, and the joints should be glued. The type, structure and number of layers of conveyor belt shall be reasonably selected according to the service conditions. The running speed of the conveyor belt shall not be greater than 2.5m/s. For materials with large agglomeration and wear, the fixed force unloading device shall be adopted, and the low speed shall be adopted as far as possible.

山東輸送帶傳動輥筒直徑與輸送帶布層的關系，傳動輥筒與換向輥筒的配合，支架角度的要求，應按設計規定合理選擇的輸送機。

The relationship between the diameter of the transmission roller of Shandong conveyor belt and the cloth layer of the conveyor belt, the coordination between the transmission roller and the reversing roller, and the requirements of the support angle should be reasonably selected according to the design regulations.

送料方向應與膠帶運行方向一致。為減少物料下落時對膠帶的沖擊，應采用溜槽，減少物料下落距離；皮帶側應使用柔軟適中的擋板，以免擋板過硬而劃傷輸送帶的帶面。

The feeding direction shall be consistent with the running direction of the belt. In order to reduce the impact of falling materials on the tape, chute shall be used to reduce the falling distance of materials; A soft and moderate baffle shall be used on the belt side to avoid scratching the belt surface of the conveyor belt due to the rigidity of the baffle.

輸送帶在使用過程中也很容易出現故障，甚至?xí)档洼斔蛶У氖褂脡勖?，所以相關的使用事項還是要多多去了解的。更多內容就來網站www.jsamsung.com.cn咨詢吧。

The conveyor belt is also prone to failure in the use process, which will even reduce the service life of the conveyor belt, so we should know more about the relevant use matters. For more information, please visit www.jsamsung.com.cn Consult. Com.